Full Size Ford Bronco Forum banner

Search results

1-20 of 485 Results
Advanced Search
  1. Oil pan/dipstick/headers question

    1978-'79 Bronco Tech
    I had best luck running hooker competition headers for fit,ease of connecting exhaust above trans crossmember and sound and I have had my 78 for close to 30 yrs now and had many different headers on it ,most fit like crap
  2. Front diff crunching

    Noobie Bronco Tech Questions. Flame free zone!
    I wonder if someone replaced one of the ring and opinions with a different ratio,but that would not explain hubs locked and t case in 2 wd noise
  3. Ontario Bronco Owners

    Canada
    i am down at mile Zero of 401 here in windsor
  4. Possible 78 purchase

    Noobie Bronco Tech Questions. Flame free zone!
    mechanical stuff is easy to repair/upgrade check the body mount crossmembers very closely,specially the rear one under the tailgate,they are multi layer and rust pretty enthusiastically there more than likely the frame will be rotted under the body mounts so check carefully and expect to lift...
  5. Windsor in a bronco

    1978-'79 Bronco Tech
    my 78 california had a 302 and 4 sp in it when i bought it like mentioned,should be an easy swap once you figure out trans situation the 302 looks very tiny in there!
  6. Interior spare tire carrier question

    Noobie Bronco Tech Questions. Flame free zone!
    i have one or two around here, i am moving in next few weeks and when i find it i can take some good detailed pics and measurements as it should be easy to fabricate from what i remember
  7. Another What is This....

    1978-'79 Bronco Tech
    never seen anything like that on the bunch of 78-79 broncos I have owned maybe a forehead scratcher for when you are working under it?:whiteflag
  8. 1979 Front bench seat measurements needed

    Noobie Bronco Tech Questions. Flame free zone!
    and Waaaaay more comfy than the stock 78-79 bench i installed a 60/40 split bench from a 96-97 lariat super cab that still allowed a tilt forward to access rear seat
  9. 1978 AC Help needed

    Noobie Bronco Tech Questions. Flame free zone!
    i had issues last summer with my vacuum /electric blower switch contacts for the blower on/off function that wouldnt turn clutch or blower fan on
  10. 1979 Front bench seat measurements needed

    Noobie Bronco Tech Questions. Flame free zone!
    I just got rid of one from an 87 f150 and if I remember correct it was like 65'' long,the seat base and back will be similar to a low back bucket dimensions for comparison, last year I had 2 rear 2014 suburban 3rd row seats,each weighted 66lbs and it cost me $120 to ship from texas to Detroit...
  11. Early snows?!?

    Anything Else
    Calgary alberta got 2 feet of the white shit according to a buddy out there
  12. build my own sliders

    1980-'96 Bronco Tech
    check out the new pickup truck toppers ,I have noticed a lot have a slightly curved window AND a sliding window too maybe be easier to make one of them work for you
  13. OEM inserts to attach cap to wheel

    Wheels/Tires
    I have used plastic drywall anchors and it worked well for the plastic caps from the 79 wheel on the aluminum rims
  14. Constant downshift out of overdrive

    Noobie Bronco Tech Questions. Flame free zone!
    what size tires and what gearing do you have? any modifications to it?
  15. 1979 W/400 running hot

    1978-'79 Bronco Tech
    I just have the stock 4 blade fan , if the rad is in decent shape, I will work fine after all it left the factory that way and not likely had cooling issues when new I find factory stuff usually works best, its when people try to "improve " what the factory spent tons of time and money designing...
  16. Bilge pump crap out in boat

    Anything Else
    the bilge pump is an important little gizmo I have a spare used one on my boat with enough hose/wiring to throw the pump overboard and hook up to my water intake hose on my v8 engine in my 23' aluminum in case the impeller in the lower unit ever takes a crap so I can at least get some cooling...
  17. Warn hubs stuck

    Noobie Bronco Tech Questions. Flame free zone!
    many times the grinder IS the proper tool for the job
  18. Another cat thread

    Anything Else
    I am a responsible cat owner,have 2 I rescued from under a loading dock at a customers(4 cats total,mom took the other 2) they were abour 5 weeks old now 3 and great pets and travel with us everywhere we go in our motorhome too the neighbour leaves food out and we have a ton of feral cats I...
  19. Another cat thread

    Anything Else
    a little late now, but wife had a jack russel that would constantly stick its nose up a skunks behind the skunk spray is actually yellow like the butter topping they put on your popcorn at the movie the best think i found for cleaning up the dog is using cream mechanics hand cleaner ( I...
1-20 of 485 Results
Top