Full Size Ford Bronco Forum banner

Search results

1-20 of 60 Results
Advanced Search
  1. Rear Gearing (semi-long post).

    Noobie Bronco Tech Questions. Flame free zone!
    My .02 cents, If your goal is to improve mpg on the bronco and not buy a commuter than the manual overdrive transmission is your best bet. Gearing not the way to go it will screw with your power at the lower speeds and current fuel useage thru those ranges. The AOD not being able to lock the TC...
  2. Tailgate torsion bar

    Noobie Bronco Tech Questions. Flame free zone!
    Thanks for the response. I will be ordering a new one.
  3. Tailgate torsion bar

    Noobie Bronco Tech Questions. Flame free zone!
    I'm getting ready to put my tailgate back together and found the torsion bar has a pretty deep groove in it where it entered the tailgate. Has anyone tried fixing this by welding and grinding or is it not worth the time and just order a new one??
  4. Broken exhaust manifold bolt - any ideas?

    Noobie Bronco Tech Questions. Flame free zone!
    As above, but, get a nut on it the best you can and as far as you can and weld the nut to the bolt internally thru the nut
  5. 78 Bronco rebuild NW Style

    78 - 96 Build Forum....Builds only
    Rear seat
  6. 78 Bronco rebuild NW Style

    78 - 96 Build Forum....Builds only
    Front seat
  7. 78 Bronco rebuild NW Style

    78 - 96 Build Forum....Builds only
    I need to get back to work on this. Got some more pieces back from the upholstery shop.
  8. post a pic of your engine

    1978-'79 Bronco Tech
    The cam was spec'd for good torque all the way up the curve and hp all in at around 5k. A different cam and it would have been over 700hp easily. Built to be a great daily driver running on reg octane gas. As for the vacuum, I am going to start with a can and see what I got for brakes. The...
  9. post a pic of your engine

    1978-'79 Bronco Tech
    Check my build thread:eek:
  10. post a pic of your engine

    1978-'79 Bronco Tech
  11. Rear Window Wiring Hack done right

    1980-'96 Bronco Tech
    No, I haven't had any time to work on the Bronco. I should be able to do a little thru the holidays then I have another trip out of country in Jan. Could be Feb before I have this going.
  12. d_rock's backroad 78 Ranger XLT

    78 - 96 Build Forum....Builds only
    Way nice project, great job!!
  13. rossisnow-rebuilding a 78 Custom

    78 - 96 Build Forum....Builds only
    my 2 cents, b pillar and upper qtr panel black stripe and black racing hood stripes :love:
  14. Info on this top please

    1978-'79 Bronco Tech
    I am interested to see if you can still get one of these as well??
  15. My '81 Bronco complete Frame Off Rebuild

    78 - 96 Build Forum....Builds only
    I love the attention to detail
  16. rossisnow-rebuilding a 78 Custom

    78 - 96 Build Forum....Builds only
    shoes look a little thin, I would do new shoes, springs, adjusters and wheel cylinders. Then no need to bust your knuckles messing with those old bleeder screws. Should be under $150
  17. The1096Raider build

    78 - 96 Build Forum....Builds only
    lookin good !!
  18. My '81 Bronco complete Frame Off Rebuild

    78 - 96 Build Forum....Builds only
    very noce work
  19. Beast back in the shop

    78 - 96 Build Forum....Builds only
    rear looks really good
  20. Rear Window Wiring Hack done right

    1980-'96 Bronco Tech
    me too ??
1-20 of 60 Results
Top