Bronco Forum - Full Size Ford Bronco Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-14 of 14 Results
  1. Noobie Bronco Tech Questions. Flame free zone!
    Alright so I recently did some work on my E40D and it looks like she isn't happy still... I'm pretty tired of dealing with my E40D with all of the shift and leak issues I've endured over the last 100k miles. I have found a 92 f150 with a i6 300 mated with a m50d trans that I can get for 2k or...
  2. Noobie Bronco Tech Questions. Flame free zone!
    Hey all, I am rebuilding a 1986 bronco with my dad. We are rebuilding the engine and accidently broke this sensor that is on the intake manifold. It broke while I was tightening down the manifold.. it is right by one of the bolts... should have installed it after torqueing down the bolts. From...
  3. Noobie Bronco Tech Questions. Flame free zone!
    Title says it all, original 302 engine in my bronco. I changed the spark plugs, wires, cap and rotor and since then it has been dying when put into gear or idling. What do y'all think contributes to this? I've been told timing or vacuum could be the issue and I have no doubt there are vacuum...
  4. Introductions
    Hello! New to the group. Wanted to share my experience so far with my 85 Bullnose purchase. Bought truck online in August 2022 with just pics and little video.(wife thought I was crazy). Truck ran but no AC. Body looked in decent shape and I liked the way it looked so I took a chance. Got it...
  5. Big Blue

    1987 Ford Bronco XLT 4X4, C6 3 speed transmission, 302 SBF, GT40 heads, Anderson n41 cam, rpm performer 2 duel plane intake, Holley super sniper EFI, 6 inch rough country lift
  6. 1980-'96 Bronco Tech
    Hello all, I have a 1988 ford bronco with a 302 and an auto transmission. I am looking to swap in a different 302 and a manual transmission from a parts vehicle I have, a 1989 f250. I am wondering how possible it would be and what additional parts I would need for this. Any feedback would be...
  7. 1980-'96 Bronco Tech
    So I'm looking to build myself a new y-pipe because my stock one just won't seal to my shorties on the driver's side (I've tried everything, the flange is just out of round and doesn't line up quite right). Anyway, I'm wondering if I could just move the O2 sensor to the passenger side header...
  8. 1980-'96 Bronco Tech
    I got a set of shorty headers from Summit Racing, everything bolted up great except for the y-pipe. I've spent nearly 9 hours trying to get it to seal and it's still leaks like crazy at the ball flanges. I'm ready to just hand it off to an exhaust shop but figured I'd ask if anyone has some tips...
  9. 1980-'96 Bronco Tech
    Okay here we go again. Bronco left me stranded for the 2nd time in 6 weeks last night. About a month ago it did the same was driving along and died on me. Would crank but not start. Realized I had no spark and replaced the ignition coil and distributor. Boom starts again. Was running sort of...
  10. 1980-'96 Bronco Tech
    Trying to get my 1980 302 bronco to pass emissions. Not sure what emissions system needs to be on it since it's straight piped and the previous owner put a motor from a newer vehicle in and a smaller belt to bypass the smog pump. Anyone have pictures of what all the emissions stuff needs to...
  11. 1980-'96 Bronco Tech
    Hello all, I've been working tirelessly to get my Bronco street worthy for California state. This all started because the rebuild was up to par for another state but I unfortunately moved to the worst state for classic cars dated after 1975... I'm very dedicated to the education, labor, and...
  12. Noobie Bronco Tech Questions. Flame free zone!
    I'm just now getting into redressing my '90 302 5.0 and obviously running into some trouble finding certain parts for Bronco specific fits, but I do see a lot of things that says they would fit the '90 Mustang 302. Hard to find any direct answers & I just want to know what exactly are the...
  13. Noobie Bronco Tech Questions. Flame free zone!
    I recently got an awesome 6" lifted 302 88 FSB with seized engine, no keys... no rust, just in need of some love, it was 9 Years in a mechanic shop who bough it like that for project but never had the time to work on it so it was left alone for all that time.. Took it apart, did a full engine...
  14. 1980-'96 Bronco Tech
    Alright so I'll put this out there my Ford Bronco well has a shit motor. So I did what I could do and found a F150 that had the same motor in it for cheap and low miles. Now here's my 1mil question I have that no one has seems to speak of. I have the rare 5 speed transmission in my bronco that I...
1-14 of 14 Results
Top