Bronco Forum - Full Size Ford Bronco Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 22 Results
  1. 1980-'96 Bronco Tech
    I’m putting gt40p heads on my 351w and already had the head bolt holes drilled out and what not but found a broken intake manifold bolt in the first hole and I’ve already tried drilling and using an extractor and broke the extractor. Im not taking them back to the machine shop so can I just run...
  2. 1980-'96 Bronco Tech
    Hey just wanted to let everyone know about this. I've just done a rebuild on an 86 full size and had been going through starters and flex plates every couple months. Everyone sells the 9 tooth starter and ford calls for it on the 164 tooth flex plate. The 10 tooth starter is the fix for this...
  3. 1980-'96 Bronco Tech
    Hey guys I know there's already other threads about this topic but, none have what I'm looking for and are couple of years old. I got the Heavy duty Headlight Harness off Jeff's Bronco Graveyard and followed instructions to a T. However, after making sure my grounds were good, and even got a...
  4. 1980-'96 Bronco Tech
    So currently I have a 89 xlt 302 aod bronco jacked up 7in on 35s Been wanting to do a engine swap for awhile now and my main goals are to keep it street able but also offroadable aswell I live in Florida so most of the time I’m mudding or just on some trails The 302 obviously lacks power...
  5. 1980-'96 Bronco Tech
    I’ve replaced my radius arm bushings and brackets, pivot bushings, shocks, springs, bearings, ball joints, tie rods, pretty much everything and there is no cracks near the steering box or anything like that and still have a popping sound when driving forward at slow speeds and some...
  6. Noobie Bronco Tech Questions. Flame free zone!
    Looking for information on compatibility with the A9P mustang Computer and a 351W. What will i need to do to make this work?
  7. 1980-'96 Bronco Tech
    What's up FSB family! Just got my first Bronco. A '95 351 E40D. Was hoping that I could tap you guys for some help here: Pre-purchase inspection addressed that the truck needed some trans work and that there was an apparent oil pan gasket leak. Truck was shifting quite hard so I took it to a...
  8. Noobie Bronco Tech Questions. Flame free zone!
    Here is an example of what I mean by "fluctuations": my video PROBLEMS: Constant engine fluctuations during all types of driving/idling. Random engine surges (ie: turn on truck and rpms jump to 2500 or while cruising, rpms will randomly jump wayyy up there momentarily). Stumbles, definitely...
  9. 1980-'96 Bronco Tech
    My 85 bronco with a 351w, c6, and lsd 3.55s will bust 34s loose. Why do people complain about 3.55s with 33s?
  10. Mountain States Chapter
    Hey gang - new to the site and Bronco ownership! Anyone been to All American 4x4 off of Santa Fe? Just moved to Littleton and picked up a ‘96 with a fresh lift, needs alignment bad! That shop is right up the road.
  11. 1980-'96 Bronco Tech
    My bronco has a 351w .30 over, mild cam, stock heads, Edelbrock avs2 carb, and a c6. 33s with 3.55s in the rear and it has no power going uphill at 65mph. I have to keep the pedal on the floor so it’ll stay at 65 going up hill. Is it just that gutless or do I have a problem?
  12. Bronco and Ford Parts/Accessories
    Brand new in box, slight fin bends here and there, but nothing to impede performance. Spectra Premium CU1451 radiator, I believe it fits all 86-96 302/351W broncos. $90 shipped to continental US.
  13. 1980-'96 Bronco Tech
    This is going to be a little long winded so bear with me, but I wanted to provide as much info as I could. :) So don't know if anyone remembers me, but back in maybe 2008-2009 I had a stroker/maf project on here. Long story short I never got it running right and lost motivation and the truck...
  14. 1980-'96 Bronco Tech
    My bronco turns over fine until I pump the gas then it slows and turns over very slow. If I let the gas evaporate it’ll turn over and start fine. Idk what is causing this and the starter is pretty much new.
  15. 1980-'96 Bronco Tech
    My bronco will only start and run with the choke completely open (it is an electric choke) and idk why but it started to do that one morning after sitting all night and it was 30 something degrees outside. The spark plugs look normal. Also I have a vacuum leak somewhere behind the dash that I...
  16. 1980-'96 Bronco Tech
    Showin you my 85: 351w, c6, etc & etc.with some problems. check out the pics: dirty as a mofo I'm hearing some knocking from this neck of the woods. This is looking north towards the port side of the tranny. Isn't there supposed to be some bolts here? Wasps' nest on my starter: thought...
  17. 1980-'96 Bronco Tech
    I have a tinking noise coming from the engine. The lifters, valves, and push rods are all good. I'm thinking either the crankshaft bearings are going out or it might be the dampner. You can see an obvious wobble on the dampner. How do i find out which dampner to get, there are a few different...
  18. Noobie Bronco Tech Questions. Flame free zone!
    351 weezer's Whats everyone running for them? I am looking to pick up a set for say a um project :toothless all I keep seeing is long tubes and well I do not want them. and bronco_rob mods this is not a wanted add. I want to buy a new set with seeing different options. :goodfinge...
  19. Introductions
    hey had my 92 Bronc with 351W for just over 2 year. Slowly adding here and their, like my homemade bumper. Which I kinda F***** up on the design. If you have any cool upgrade suggestion drop me a line
1-20 of 22 Results