Bronco Forum - Full Size Ford Bronco Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Noobie Bronco Tech Questions. Flame free zone!
    Hi All - These have been so useful as I've started restoring my Dad's 78 RangerXLT. First was get a new motor because the old one broke. Then I started on the tailgate and some other drive-ability items. I'm thankful to all you for posting your troubles and solutions so here's hoping you can...
  2. Noobie Bronco Tech Questions. Flame free zone!
    Hello all, I'm finally getting back to working on my '90 Bronco XLT. I had completely removed the front suspension and am replacing anything that's a wear item. I've gotten the axle housings installed, and am up to the point of installing the steering knuckles, and that's where I'm stuck...
  3. Blog
    So I finally fixed my steering issue. I ended up pulling the knuckles off and making sure the camber bushings were seated in correctly. Then i put the knuckles back on using the correct torque specs and it drives like a dream. Now i need to go back to the alignment shop and let them know that i...
1-3 of 3 Results