Bronco Forum - Full Size Ford Bronco Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 21 Results
  1. 1980-'96 Bronco Tech
    Ok.. So I am going crazy. A few weeks ago I replaced all my components. Drums, Discs, Springs, Calipers etc.. the whole deal. Get to bleed the system and couldn't get the air out. FIgured I would replace the Master. Did that and then the lock up started happening. I could drive like ten block...
  2. Bronco and Ford Parts/Accessories
    T-bird calipers I bought from Duff a few years back. I had them powder coated red at Miller’s and rebuilt them in January with steel pistons. Have put 150 miles on them since then. They work fine, just replaced them with a Huge Brakes kit. Come with stainless DOT brake lines, speed bleeders...
    $200 USD
  3. 1980-'96 Bronco Tech
    Hi all, Today the brake light illuminator (the same one for the parking brake) on the dash has become noticeable and constant. The other day I noticed it flicker a bit but it went away. Today it comes on steady but intermittently. Effectively, when I turn the key to first position, it lights...
  4. Noobie Bronco Tech Questions. Flame free zone!
    Hey Ya'll So I'm rebuilding my rear brakes and only have one of these anchor pins. I've searched ebay, Tasca parts, napa, even a few ford dealers and can't seem to find them. I believe they are Anchor pin plate 2028 or 2028A - is there a substitute part in the brake rebuild kits? Also, I've seen...
  5. 1980-'96 Bronco Tech
    Hello, I searched for this and only saw people talking about how good the porterfield r4s pads were. Does anyone know the part number to use to order off thier site?
  6. 1978-'79 Bronco Tech
    Hey all, finally bought my dream 78. So yes the brakes are garbage... and the previous owner hodge-podged a bunch of cheap chinese bandaids and it locks up front or rears constantly. So I'm going to start from scratch. The only thing I'm hung up on is the booster -- I've read all the posts...
  7. EBC Brakes
    To see EBC’s pad & disc/rotor recommendations, just let us know what & how you drive, then leave the rest to us. The below link will take you to our interactive Brake Selector Tool, where basic questions on your car or motorcycle and driving style will determine the best recommendation for you...
  8. 1980-'96 Bronco Tech
    Hi there, I'll try and include as much info as possible. Long time lurker, first time poster, so I may be missing some things. I am having overheating issues on my front brakes that have lasted for a while now. It started when my dad and I replaced my ball joints and cranked my bearing nuts too...
  9. 1980-'96 Bronco Tech
    Hello everyone! So I just finished bolting up the Hydroboost to my 96 bronco which already has a saginaw pump and a 36 splined superduty steering gearbox. The Hydroboost is a recent addition as my vacuum booster decided to start leaking. What I cant seem to find anywhere is the right fittings...
  10. Noobie Bronco Tech Questions. Flame free zone!
    Good morning/afternoon/evening everybody. Okay so this all started when I removed the front calipers to inspect and paint them while I was replacing my front rotors and brake pads. After reassembling everything correctly (to my knowledge) I bleed all 4 brakes starting from furthest from the MC...
  11. EBC Brakes
    So, here at EBC Brakes We like to offer a free set of pads each month to a randomly selected forum member. In past giveaways We have discussed our first cars, garage and storage spaces, famous people we have met or would like to have met and weird and wonderful vehicles amongst other topics...
  12. 1980-'96 Bronco Tech
    I have a 95 bronco sport on a 4"lift with 33" Nittos. A week or so ago i was driving and it appeared my alignment was off as the steering wheel was not centered..... slightly turned to the left.... when i got to work and got out I smelled something funny and popped the hood to look for leaking...
  13. Noobie Bronco Tech Questions. Flame free zone!
    So i made a thread of how to bleed and it all works and it was still super sguishy and went to the floor, so i changed to the new abs hydro unit......nothing ok so i changed the master and it made it stiffer but now its too stiff and even with a booster i have to push abit hard to brake i...
  14. Noobie Bronco Tech Questions. Flame free zone!
    So im heading out to work, get in my truck, turn the key and starter wont spin, first thing i check is the mabbtery, a/c blows fine, lights turn on, dash light up and when i go to start the light dim down but no starter. i moved some cables and some things on the started and nothing, then i...
  15. Noobie Bronco Tech Questions. Flame free zone!
    Hi guys! Yesterday, I was up underneath sanding some rust off to prep for a good coat of POR15, and needed to get these lines out of the way. In the process of unhooking, I noticed that this assembly is just sort of... hanging out down there? The tension holds it steady enough, but is it...
  16. Noobie Bronco Tech Questions. Flame free zone!
    Does any one have a good write up or video of how to remove the hub from the disk? cause i need to soon do a change of pads and rotors since i can hear things happening in the front. also recomendations of replacement parts, cause im thinking of getting some duralast gold semi-metallic, but the...
  17. Noobie Bronco Tech Questions. Flame free zone!
    Removing the ABS on my 95 while I'm doing an engine swap. Anyone know which port is which on the master cylinder/4wabs in terms of front and rear brakes? Steve83's image has the ports flip flopped between the main image and the small sub image
  18. Noobie Bronco Tech Questions. Flame free zone!
    So, I have a 95 XLT 5.0, my ABS light has been on for about a week and my truck doesn’t seem to want to get out of 1st gear. I’ve replaced the VSS and correct led the wiring to it, but that didn’t resolve the issue. I’ve seen posts about jumping the 4WABS, I’m just unsure of how to actually do...
  19. Noobie Bronco Tech Questions. Flame free zone!
    Hi! This is my first post on this forum, I started renovating/restoring an old Bronco XLT 1987 Automatic 5L about a week ago and have spent a lot of time replacing brakes and stuff. I've finished replacing and "fixing" the front disc brakes. I got the motor running before I could do the rear...
  20. Noobie Bronco Tech Questions. Flame free zone!
    I've had a problem with my bronco where in traffic brakes randomly locks up and basically gotta overpower it by going into second. Ebrake isn't engaged that i know of, the cable underneath doesn't feel tense. Any help would be appreciated, its getting to the point where It's probably not safe to...
1-20 of 21 Results
Top