Bronco Forum - Full Size Ford Bronco Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Noobie Bronco Tech Questions. Flame free zone!
    If one wanted to convert a 351w from efi to carburetor with an automatic transmission, what would be needed to maintain the functionality of the computer controlled transmission? (referring to the E4OD in a '92) Would it be as simple as rigging up a TPS to the throttle linkage? Or is there...
  2. Noobie Bronco Tech Questions. Flame free zone!
    Hey y’all, I have some questions about the emission control system in our carbureted trucks. Most of mine (as far as I can tell) is working, but pulling apart my carb I’ve found a suspicious looking mixture control solenoid: after learning a little about this part, I can see that it’s pretty...
  3. 1980-'96 Bronco Tech
    Now that I've retired, I'm finding the time to do something with my old Bronco that has been sitting idle for years. My problem today is it seems the moving parts of the throttle process are stuck. Thought at first it might just be the cable but after detaching it from the linkage I find that...
  4. 1980-'96 Bronco Tech
    alright guys here it goes. I got a 87 bronco 5.8L 351w carb. So recently I took carb apart cleaned it out replaced gaskets and so on ya know the kit comes with. Well I also went ahead and replaced the fuel filter that’s going from my fuel filter that’s connected to motor near oil filter it’s a...
  5. Noobie Bronco Tech Questions. Flame free zone!
    I recently got an 83 bronco with a 302, everything seems pretty stock under the hood. They said it had a carb issue, but it looks like it was just a faulty fuel pump that was leaking. I updated the ignition coil, fuel pump, plugs, wires & distributor cap. I'm looking at swapping the 2 barrel out...
  6. 1980-'96 Bronco Tech
    Hello all, I have a 1986 Ford Bronco with the 5.0L EFI and a 4 speed manual. My efi fueling is on a base curve as someone before me removed all the sensors for electronic control. The fuel pumps are on a toggle switch and both pumps are brand new. I get around 8-10 mpg with this setup and I am...
  7. 1980-'96 Bronco Tech
    I put a new Holley on my mild 351w and it would leak and idle higher and higher as the choke opened but ran very rich to where black smoke was puking out the exhaust so I took it back and got an edelbrock and it also idles high as the choke opens but not as high as the Holley. Could it be the...
  8. 1980-'96 Bronco Tech
    My bronco will only start and run with the choke completely open (it is an electric choke) and idk why but it started to do that one morning after sitting all night and it was 30 something degrees outside. The spark plugs look normal. Also I have a vacuum leak somewhere behind the dash that I...
  9. Blog
    Yesterday I called D&D Performance about my carburetor and they were able to help me find the perfect carb and gave me a decent quote on labor at one hour. The carb that I will be replacing the old one with is the Holley Model 4160 part number 0-80457s (take that down)... ...While an...
1-9 of 9 Results
Top