Bronco Forum - Full Size Ford Bronco Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Noobie Bronco Tech Questions. Flame free zone!
    Hey Guys. On cold or particularly wet starts my CEL will blink 4 times, rev up to 1500-2000rpm, choke down to 300rpm, back to 1200rpm, then finally drift back down to normal 700rpm idle. All of this within 30 seconds. It's an '94 302 with OBD1, no stored codes or any issues during KOER or KOEO...
  2. 1980-'96 Bronco Tech
    Hi all, I'm just wrapping up a year-long rebuild of a '96 Bronco. Bought the truck without an engine, and rebuilt a low mileage 351 out of a '95 F150 to drop in it. The problem I'm running into is that the '95 engine didn't have the misfire sensor and tone ring on the harmonic balancer. I read...
  3. Noobie Bronco Tech Questions. Flame free zone!
    a few months ago i bought another bronco, its an 88, w/ 4" of lift, 35's and alot of work on the motor, the guy i bought it from really rigged it up horribly, i got the truck running good, but a few weeks ago the check engine light came on, i bought an actron code scanner, but it wont read any...
1-3 of 3 Results
Top