Bronco Forum - Full Size Ford Bronco Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-14 of 15 Results
  1. 1980-'96 Bronco Tech
    Hello everyone, long time listener, first time caller!! I have a 1996 bronco xlt 5.8 E4od that my wife and I just purchased. It’s a fix-er-upper. One of my issues is the extension housing is literally broken in half. The half that remains is the front half that bolts to the transmission. I do...
  2. Noobie Bronco Tech Questions. Flame free zone!
    Alright so I recently did some work on my E40D and it looks like she isn't happy still... I'm pretty tired of dealing with my E40D with all of the shift and leak issues I've endured over the last 100k miles. I have found a 92 f150 with a i6 300 mated with a m50d trans that I can get for 2k or...
  3. Noobie Bronco Tech Questions. Flame free zone!
    Alright so I've got two front pumps. One has a damaged front main seal surface but rebuilt internals and the other with damaged/old internals on the back half but clean gasket/seal surfaces on the front half. The part numbers are... RF-E9TP-7B324-BA and RF-F1TP-7B324-AA ... Visually, on...
  4. 1980-'96 Bronco Tech
    Alrighty, first post here, so if this is the wrong place please feel free to correct me. 94 Bronco, MAF 302, E40D, both motor and transmission rebuilt 30k ago with minor modifications such as Cam, Heads, and the E40Ds internals were beefed up along with a punisher valve body installed. My...
  5. Noobie Bronco Tech Questions. Flame free zone!
    Sorry for this being a long one. So I bought a Bronco, 351W E40d 4x4, what was some ones project truck that sold it to another guy that i bought it from. I have been working through all the electrical issues got most of them sorted out from the engine swap that they put a 96 engine in a 92...
  6. Noobie Bronco Tech Questions. Flame free zone!
    Hey Guys, I'm trying to troubleshoot a wobbly speedometer and late shifting. I've seen some contradicting responses on the forms. From what I understand, the 1990 E4OD does not have a PSOM, and uses a mechanical speedometer cable from the t-case. I unhooked the speedometer cable from the t-case...
  7. 1980-'96 Bronco Tech
    Hi! I was wondering if anyone could help me pinpoint the source of some new issues I'm having with my Bronco. Or if anyone else has experienced similar issues. 91 Bronco 5.0L V8 E40D Transmission 147K miles Initially, it was throwing a 629 check engine code: converter clutch solenoid circuit...
  8. 1980-'96 Bronco Tech
    Hey yall, My '96 E40D now has almost 200k miles on it. This week I did the 6-liter tune-up without the advancing in timing. It has been running great for a few days, however today it has been struggling to shift into overdrive. No codes are coming up, trans fluid looks fine, and it runs...
  9. 1980-'96 Bronco Tech
    ok so i've got a 95 bronco 5.8 e40d and its SD not MAF and im looking to get some better power without changing to MAF. i've been looking at blueprint 408 engine, 408 stroker kit or just a whole new engine swap, id like to keep it to around 6-8k budget. i know broncos aren't suppose to be tow...
  10. 1980-'96 Bronco Tech
    So I have a 90 lifted with 35’s and a 5.8. I just read the thread 4:11 or 4:56 thread and gained some insight. My problem. I bought the truck with the assumption that I have stock tranny (40d) and stock gears (3:73). I have a big lift and just smoked the forward gears in the tranny. The tranny...
  11. Noobie Bronco Tech Questions. Flame free zone!
    so recently ive noticed when driving when i let off the gas the engine will rev up to about 1400 and back down to 1100 then back up then back down until i either give it gas to accelerate or brake a good bit. this only happens in 2nd, 3rd, and 4th i think but 2nd and 3rd for sure. this will...
  12. Noobie Bronco Tech Questions. Flame free zone!
    Had a leaky rear main in my 92. Replaced it and got the tranny back in. How do I got about refilling the tranny with fluid? And do I need to do anything to refill the bell housing with fluid? Thanks.
  13. 1980-'96 Bronco Tech
    I have a 93 with a blown e40d I'm looking to replace with a c6 I have a complete late 80s parts bronco with the c6 both have the 5.0 I know I need to use the trans mount transfer case and drive shafts. Thinking about putting a slap shift in the floor what all would I need to do for the swap and...
  14. 1980-'96 Bronco Tech
    I bought a '90 fullsize with a 5.0, e4od, cruise control, BW1356 electric T-case and 35 inch tires. I brought it home on a trailor because the T-case was bad. I swapped in a good NP208. I'm not sure what year the NP208 came out of, if it was a M/T or A/T or if it ha s cruise control. The VSS...
1-14 of 15 Results
Top