Bronco Forum - Full Size Ford Bronco Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. 1980-'96 Bronco Tech
    Hey, I don't really use forum too often, so forgive me if I'm long winded. I need help/advise working on this truck please. My dad got his Bronco in the late 90s/early 00s and, unfortunately, has been out of commission since about 04-06. He took it to a shop, finally, about 6 months ago and...
  2. Noobie Bronco Tech Questions. Flame free zone!
    If I wanted to upgrade my stock camshaft to a COMP Cams 35-255-5, what else would I have to do? Would I also need new lifters, springs, push rods, chains, or a different distributor/gear? Or could i just swap in the new cam when I rebuild the engine? My engine is a fully stock 351W from 1990...
  3. Noobie Bronco Tech Questions. Flame free zone!
    So im trying to compile as much information as I can regarding engine rebuild. Im comfortable doing top end but the bottom end is intimidating. Im not sure the condition of the engine after 96k since the previous owner used rtv instead of gaskets,im scared it was badly taken careoff, hence the...
1-3 of 3 Results