Bronco Forum - Full Size Ford Bronco Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 10 Results
  1. 1980-'96 Bronco Tech
    I got a set of shorty headers from Summit Racing, everything bolted up great except for the y-pipe. I've spent nearly 9 hours trying to get it to seal and it's still leaks like crazy at the ball flanges. I'm ready to just hand it off to an exhaust shop but figured I'd ask if anyone has some tips...
  2. 1980-'96 Bronco Tech
    Been trying to diagnose a low, lopy idle (sounds like a really hot cam) after a MAF swap and bump to 36# injectors (sensor is calibrated for 36#). Stock otherwise. Wideband O2 reports extremely lean condition (hovers around 17 or 18+), but the truck is drivable (just a little underpowered)...
  3. 1980-'96 Bronco Tech
    Greetings B-Fam! Has anyone installed headers on an inline 6 4wd? I keep seeing this, Hedman Hedders 89300, but it says 2wd only. I’m assuming there is a transfer case issue. You guys have been great on direction before. :) l’m hoping for the trifecta help win :) thanks guys!
  4. Noobie Bronco Tech Questions. Flame free zone!
    My exhaust is cracked in multiple spots and a few brackets have actually broken so i have decided to look into getting it redone. I have been looking into new headers, so if anyone has opinions on long tube or shorty headers that would be appreciated. I really like the look of a dual exhaust so...
  5. 1980-'96 Bronco Tech
    So let me start by saying that I'm not here to make more power and that I'm also a student and don't have a lot of cash to throw around. Now, my passenger side exhaust manifold is completely cracked in half and I could replace it with another stock style manifold for around $70 but if possible...
  6. Noobie Bronco Tech Questions. Flame free zone!
    Team, 1995 5.0 EB. I found a hole in the passenger's side header, took to a local muffler shop. They weren't able to find matching headers (brand isn't made anymore), so had gotten a new set of Basani shortys, and since it wasn't an exact match I just had them order and install both sides in...
  7. 1978-'79 Bronco Tech
    Finally getting around to the mountain of work my late Dads 79 needs and I can’t for the life of me match up the shape of the header gasket to anything I’m seeing online. There’s an exhaust leak developing that I hope I can cure with a new gasket. I know he had a nice dual exhaust made up for...
  8. 1980-'96 Bronco Tech
    Hey guys. I'm back. I'm thinking about getting my entire truck rebuilt i.e. shocks, struts, bushings, bearings, tie-rod ends, etc. Just replaced my ball joints and front and rear brakes are good. What is the best choice for material in terms of polyurethane or rubber bushing, Moog as...
  9. Noobie Bronco Tech Questions. Flame free zone!
    351 weezer's Whats everyone running for them? I am looking to pick up a set for say a um project :toothless all I keep seeing is long tubes and well I do not want them. and bronco_rob mods this is not a wanted add. I want to buy a new set with seeing different options. :goodfinge...
1-9 of 10 Results
Top