Bronco Forum - Full Size Ford Bronco Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 28 Results
  1. Noobie Bronco Tech Questions. Flame free zone!
    Hi All, So I have owned my 1989 Bronco since 2019. Not a very long time I know but still. So when I originally got the bronco, the paint still had clearcoat on and the paint was very vibrant. Since then the paint has faded and if you touch the paint itll come off on your finger. I'm assuming...
  2. 1980-'96 Bronco Tech
    1990 eddie bauer bronco with a 5.8 and e4od My transmissions been slipping for awhile now and feels almost as if it’s not wanting to downshift from 2nd to 1st. I pulled the pan expecting a mess but it was honestly pretty clean, only about a teaspoon of clutch dust at the bottom, but then again...
  3. Noobie Bronco Tech Questions. Flame free zone!
    I have a 92 Bronco and I’m having an issue. There’s an audible front end clunk that happens randomly at random speeds. While clunking it causes the brake pedal to pulsate up and down. Everything in the front end is tight and the entire brake system has been bled religiously. The hubs are...
  4. Noobie Bronco Tech Questions. Flame free zone!
    Hello! I am a new owner of a 93 Broncosaurus, and I just blew the Differential by getting stuck in the sand. The car is in Portugal so there are no spare parts over here. I was wondering if you would be so kind as to identify the Differential and let me know how I go about replacing the whole...
  5. 1980-'96 Bronco Tech
    My 87' bronco Ignition cylinder seems like it's slipping off of the run position, I have no problem replacing it however I just want to make sure there's not an underling problem. From when i got it (2years) i always had to turn the key back a bit to prevent the starter from running while...
  6. Noobie Bronco Tech Questions. Flame free zone!
    Hey guys, So I have been experiencing issues with my rpms sticking... It seems to just do it randomly but it'll get stuck at 1500 rpms then it'll drop down almost like its gonna quit and go back to 700 rpm I have replaced the IAC and I have replaced the throttle cable since the one I had would...
  7. Noobie Bronco Tech Questions. Flame free zone!
    Just wondering how many miles I have. I’m confused cause of the white number to the right
  8. Noobie Bronco Tech Questions. Flame free zone!
    Guys and gals... I'm in big trouble. I have a 1987 with the 4.9 straight six and a 4 speed Tremec 4 speed manual transmission. I bought this truck a couple years ago and have had electrical issues since day one. I bought it as a project truck and was able to do a bunch of work on it myself, but...
  9. Noobie Bronco Tech Questions. Flame free zone!
    Recently purchase a 1992 bronco that my Wife and Baby daughter will use as a fun vehicle, I have spent a tremendous amount of time trying to get it to run as it should and as best as it did the first time I drove it, It has a problem where it will operate decently until it gets warm when it does...
  10. Noobie Bronco Tech Questions. Flame free zone!
    Hello everyone! Just picked up my very first bronco. Just dealt with the headache of replacing all of the brake lines, the starter, starter solenoid and some other odds and ends. Now I’m left with I new problem seeking help. When driving after the vehicles getting warmer if I’m moving there is a...
  11. Noobie Bronco Tech Questions. Flame free zone!
    So i drained the old coolant cause it was some distilled water and some random import coolant i had laying around, so i drained it and put the new one, it actually idles better, don't know why. i also gave it more than when i first filled it, to the very top of the radiator, but........theres a...
  12. Noobie Bronco Tech Questions. Flame free zone!
    I have a 90’ EB that needs a complete dash replacement, but I can’t find anywhere that sells the actual pieces that I need, anyone know?
  13. Noobie Bronco Tech Questions. Flame free zone!
    So I’ve been reading all over this trying to figure out my problem. It shifts great manually but when I put it into drive it won’t shift into second until 3000 rpm and drops into gear hard. When I push the pedal to floor and it tries to downshift it just revs up and doesn’t drop down into gear...
  14. Noobie Bronco Tech Questions. Flame free zone!
    So my door lock buttons and my rear window key switch won’t work. I have checked voltage in the door lock buttons and the have 12 and 11.5 on the multimeter. I can’t find a spot to get a reading on my rear window. The fuse is not a clear one but I believe it was blown so I bought a new one and...
  15. Noobie Bronco Tech Questions. Flame free zone!
    Heres the situation, I recently replaced my fuel pump in a tank that has been sitting for 4 years, but I didn't get a chance to clean the tank I only siphoned the bad fuel and replaced it with fresh fuel. The truck has been running fine and I have been performing other maintenance on it. The...
  16. 1980-'96 Bronco Tech
    I’ve done wheel bearings, ball joints, tie rods twice, radius arm bushings, shocks and springs, steering box, and replaced rag joint with flaming river joint. My bronco started riding rough and the steering gets loose going over bumps and jerks a little and sometimes it gets tight turning around...
  17. Noobie Bronco Tech Questions. Flame free zone!
    So the seat belt retractor for the rear bench seat in my Bronco won't let the seat belt actually retract and stays in the locked position, the cover got knocked off years ago so here's what the retractor looks like. I can unlock it manually it just won't stay unlocked. Help would be greatly...
  18. Noobie Bronco Tech Questions. Flame free zone!
    okay as my user name implies, I have a 94 bronco with the 351 and recently while I was driving home she stopped going forward. When the problem started, peddle to the floor i was only getting 1500rpm and going about 30mph. Then it was doing 1500rpm and barely touching 1mph. Now in park, I touch...
1-18 of 28 Results
Top