Bronco Forum - Full Size Ford Bronco Forum banner
intake
1-5 of 5 Results
  1. 1980-'96 Bronco Tech
    I am going to be ordering a 408 for my 89 bronco. I want to keep efi. Planning on doing a MAF swap. So here is where my question starts could you run a air gap manifold and fabricate a elbow of sorts and mount your throttle body to it? My reason is I have a air gap laying around and I know the...
  2. Noobie Bronco Tech Questions. Flame free zone!
    Hi all, been combing through all the posts, but can't find the one I read a few weeks ago that was a pretty good write up on someone converting their 90-92 bronco to MAF and if someone can help me by linking that write up, it would be much appreciated. In the mean time I found a local yard with...
  3. Noobie Bronco Tech Questions. Flame free zone!
    I’m new to owning a Bronco. I have 1991 5.8L Eddie Bauer edition. Im planning to put spray Seafoam into the intake to clean it out. I know that generally you have to spray the Seafoam directly into the intake to avoid getting it on the MAF sensor. However I also know that since mine is a 91, I...
  4. 1980-'96 Bronco Tech
    Couple of questions for you guys on an 86 EFI 5.0. I've been dealing with an erratic idle (revs up high for seemingly no reason, then down, then up, then decides it wants to stumble and or die) problem for quite a while now, and I'm finally fed up with it. I checked and cleaned the IAC, it...
  5. 1980-'96 Bronco Tech
    ive got an 88 bronco wit a 5l in it. i find when i go wheelin i end up suckin water in my intake my filter stops most of it but was wonderin if thurs an aftermarket air cleaner set up i can get to get the intake up higher outta the way of the water
1-5 of 5 Results
Top