Bronco Forum - Full Size Ford Bronco Forum banner
lift
1-11 of 12 Results
  1. Noobie Bronco Tech Questions. Flame free zone!
    Recently got this 91 FSB Custom for my son and I to work on. Not knowing a lot about these trucks yet, I’ll be picking y’all’s brains quite a bit!!! Looking at the stance, it seems to be either high in the back or low in the front. Check out the photos and let me know your thoughts! Thank you...
  2. 1980-'96 Bronco Tech
    Hey y’all, as you may or may not have been following him I’m building a 1980 Ford Bronco in South America .....remotely and I am using assorted mechanics but I finally figured out the right people to use. We have an issue with the front suspension where as nobody is sure how to correct the...
  3. 1978-'79 Bronco Tech
    So I have a 78 f150 4x4 frame that I want to lift. I planed to do that by doing a rear shackle flip, and using the front hanger from a 1970 f250 as the new rear hanger. If I were to take out the lift block, I calculated that it should give me about 4 or 5 inches of lift in the rear. My problem...
  4. Noobie Bronco Tech Questions. Flame free zone!
    I am a new bronco owner and was looking into future suspension upgrades. I honestly don’t know if I even have the right idea here, but I’ve been doing some research and this is what I’ve come up with. Currently I have a 6 inch rough country lift. In the future I planned on putting in Fox 2.0 14”...
  5. 1980-'96 Bronco Tech
    Can we share pics of the 2.5" rough country lift installed on our Broncos? I see plenty of 4" & 6", but probably only seen one pic of the 2.5" on the whole forum. Who else runs the 2.5"? I'm seriously considering getting it instead of the 4" or bigger. Just want a small lift and want to keep...
  6. Blog
    COMMENT DON'T JUST READ IT... i have a 4 inch lift coil spring in the front of my bronco i wanted to lift it to a 6"-9" lift and put blocks on the springs but i need leafs on the front end is there a easy way to do such a thing without welding or cutting anything???
  7. Want to buy Parts/Accessories/Misc other items
    After having the bronco for a few months i'm getting very bored with the stock suspension. I am looking for a 6 inch lift and 35s to go along with it. Im looking for a kit thats easy to install and on the cheaper end....everybody knows how the economy is these days. The tires would have to...
  8. 1978-'79 Bronco Tech
    can anyone tell me how much lift i need to put under a 78 to be able to fit 35's?
  9. Want to buy Parts/Accessories/Misc other items
    Hey guys I am new to the bronco world and just picked up a 78. I would like to find some 35-38" good mud tires. Only very aggressive mudders such as TSL's or Boggers...only something else if comparable. I am located south of pittsburgh so unless you want to figgure out how to ship large...
  10. Introductions
    Son and I picked up an '89 Bronco XLT. 33" tires, rub a bit, looking at suspension and body lift (2" each...mild) So far, fluid changes, new wheel cylinders on rear (they're cheap and I always change when I redo drums). 139k actual mileage, changed plugs, looked good except for one was fouled...
  11. 1980-'96 Bronco Tech
    I found this lift kit on ebay and just wanted to know what you all think about it. And if it is just bolt on. http://cgi.ebay.com/ebaymotors/80-96-Ford-Bronco-6-Lift-Kit-w-EVERYTHING_W0QQcmdZViewItemQQcategoryZ33585QQihZ014QQitemZ330236745445QQrdZ1QQsspagenameZWDVW
1-11 of 12 Results
Top