Bronco Forum - Full Size Ford Bronco Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 4 Results
  1. Noobie Bronco Tech Questions. Flame free zone!
    Hi all, I’ve got a 1996 with a 5.0. I installed a Torque-master Aussie locker which I’ve heard good things about. The problem is that a C-clip is used to retain the passenger side half shaft and with the locker you cannot re-install the C-clip. So you have to install a spring inside the slip...
  2. 1980-'96 Bronco Tech
    I’ve had issues with the front end of my rig shaking uncontrollably at 65 MPH and above. Determined we needed to change out the ball joints. The PO put 33s on but didn’t change the gears. It’s very apparent when climbing hills and it just doesn’t have the umph. Since we had to take the axles...
  3. Noobie Bronco Tech Questions. Flame free zone!
    So I am looking for everyones opinion on this one. I have a an 8.8 in the rear and the TTB dana 44 front in my 93 FSB. I am pushing 35's with a 302 and E4OD. I am putting 4.56's in in the next month and am wondering which locker to put in the 8.8 and which limited to put in the front. I am...
1-3 of 4 Results
Top