Bronco Forum - Full Size Ford Bronco Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. 1980-'96 Bronco Tech
    I don’t know what to do at this point. One day I go to warm up the 95 bronco and it didn’t start, it made the clicking noise when I tried to turn it over. First thing I did was check the relay on the fender. It was pretty old so I figured might as well change it out. Still the click. So I...
  2. Noobie Bronco Tech Questions. Flame free zone!
    Hey guys, I have a '94 5.0 Full Size Bronco. Looking for a part number for the wiring that goes from the Starter Relay (solenoid) to the Starter. In particular the ground. I have some corroded (27 year old) wires. It is causing it to short out. I've done some research on my own, but can't...
  3. Noobie Bronco Tech Questions. Flame free zone!
    I need some input to see if I did this correctly and if my assessment is correct. So I recently had to take apart and put back together my cylinder lock. I made sure the key was in the RUN position when I put it back in and that the actuator was fully forward (towards the fire wall). When I...
1-3 of 3 Results