Bronco Forum - Full Size Ford Bronco Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Noobie Bronco Tech Questions. Flame free zone!
    Replaced pitman arm and installed a reman steering box. Bronco steers like new, however the steering wheel is now off 30-45 degrees to the left. I believe I can lock left and the right same distance on the steering wheel. My wheels seem very straight and get no pull at all while driving. The...
  2. 1980-'96 Bronco Tech
    Hi Team, great to be here again...(sold my 1989 a while back). I picked up a 1993 XLT with the 5.8 in it yesterday. The steering wheel seems to be tilted all the way up with no lever to bring it back down. I would have assumed that all XLT models have tilt wheel but maybe it was an option? My...
  3. Noobie Bronco Tech Questions. Flame free zone!
    1989 Bronco EB, 5.0 automatic w/ Tilt Okay so This has been a long project. -Front end steering / suspension rebuild -alignment performed at shop **steering wheel play still present -installed new redhead, rag joint, and power steering pump. When I primed the box (back&forth a bazillion...
  4. 1980-'96 Bronco Tech
    How To Remove Your Steering Wheel | Ford Bronco OBS F150 F250 F350 (92-97)
  5. Noobie Bronco Tech Questions. Flame free zone!
    Hi All, Recently replaced my turn signal switch ('89 Eddie Bauer 351, tilt steering) and after installing the new one, ran through testing all the signals & lights with everything working fine. I rebuild the column and put the steering wheel back on, test again and everything works until I hit...
  6. 1980-'96 Bronco Tech
    I have a 1996 Bronco with a leather covered steering wheel that's chewed up top center. From posts I've read in a search on the subject, it sounds like a common problem. The only replacement option that was mentioned was a new wheel from Ford. When I checked a couple of weeks ago they were...
1-6 of 6 Results
Top