Bronco Forum - Full Size Ford Bronco Forum banner

suspension

  1. Noobie Bronco Tech Questions. Flame free zone!
    I am a new bronco owner and was looking into future suspension upgrades. I honestly don’t know if I even have the right idea here, but I’ve been doing some research and this is what I’ve come up with. Currently I have a 6 inch rough country lift. In the future I planned on putting in Fox 2.0 14”...
  2. 1980-'96 Bronco Tech
    I’ve done wheel bearings, ball joints, tie rods twice, radius arm bushings, shocks and springs, steering box, and replaced rag joint with flaming river joint. My bronco started riding rough and the steering gets loose going over bumps and jerks a little and sometimes it gets tight turning around...
  3. Noobie Bronco Tech Questions. Flame free zone!
    Hello all, I have a '95 Eddie Bauer 5.8 4x4 My rear leafs seem to be sagging a bit, so im going to replace the rear leaf springs. i also noticed the shackles that hold them are cracked i plan on changing them as well has anyone made a list of all the parts needed to make the rear leaf springs...
  4. Discuss the 2021+ Bronco Here
    Ford has filed a new patent that suggests that the new Bronco is going to have an intricate terrain-response system and an active suspension setup. The system in the patent is called Anomaly Mitigation Suspension Mode (AMSM) and according to an article form Motor Trend "The Ford patent...
  5. 1980-'96 Bronco Tech
    Can we share pics of the 2.5" rough country lift installed on our Broncos? I see plenty of 4" & 6", but probably only seen one pic of the 2.5" on the whole forum. Who else runs the 2.5"? I'm seriously considering getting it instead of the 4" or bigger. Just want a small lift and want to keep...
  6. Blog
    I recently bought a 1990 Bronco. for a while now I have been trying to lift it, but I wanted to get rid of the shitty independent suspension. I also have a jeep wagoneer with dana 44 axles. can I swap the jeep axles into my Bronco? will they line up? because if they do I will do a 6 inch rough...
  7. 1980-'96 Bronco Tech
    Hey guys. I'm back. I'm thinking about getting my entire truck rebuilt i.e. shocks, struts, bushings, bearings, tie-rod ends, etc. Just replaced my ball joints and front and rear brakes are good. What is the best choice for material in terms of polyurethane or rubber bushing, Moog as...
  8. 1980-'96 Bronco Tech
    I have a 91 FSB that i drive daily. I buddy has an 86 with no motor. He said i could use parts off of it if i wanted them (no charge). Anyway i need new shocks and leaf springs mine are done. Im not sure if they will fit. The 86 has trailmaster shocks on it and stock leaf springs in the back...
  9. FSB Member Vendors
    Very cool. We are excited to be FSB's newest VENDOR. We are a full service shop that specializes in lift kits, lockers, locking hubs and winches. We also do custom work so if you are near Ellensburg WA and need something done let us know! We can get you the best deal possible on Rough Country...
Top