Bronco Forum - Full Size Ford Bronco Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Noobie Bronco Tech Questions. Flame free zone!
    So I bought last month a 1990 FSB with the auto 5.8L that has been sitting on pavers since 2011. I have been having issues with my temperature gauge. It stays below the cold line on the gauge and doesn't move at all whatsoever when running. However when I turn the key on to have the fuel pump...
  2. 1980-'96 Bronco Tech
    Been trying to diagnose a low, lopy idle (sounds like a really hot cam) after a MAF swap and bump to 36# injectors (sensor is calibrated for 36#). Stock otherwise. Wideband O2 reports extremely lean condition (hovers around 17 or 18+), but the truck is drivable (just a little underpowered)...
  3. 1980-'96 Bronco Tech
    So I'm still new here and am figuring everything out. I have a '95 XLT and my temp gauge reads cold no matter how long I drive. I have replaced the thermostat and it is in the correct direction and I also replaced the temperature sender. The top radiator hose does get hot so I know that I'm...
  4. 1980-'96 Bronco Tech
    1995 XLT 5.0L I have already replaced the temperature sender and the thermostat and my temperature gauge stills reads cold. The gauge itself works properly because when I ground the wire it reads hot and when open it reads cold. However, when I have the engine warmed up, the top rad hose is...
1-4 of 4 Results
Top