Bronco Forum - Full Size Ford Bronco Forum banner

transmission

  1. Noobie Bronco Tech Questions. Flame free zone!
    Hey Guys, Does anyone have any recommendations for a shop in Las Vegas that can work on the transmission for my 92 XLT (E40D). I’m not mechanically inclined and I’m a slave to work so I lack the time. Also, if I were to do a swap, is it recommended to get a crate engine? I’ve researched and...
  2. Dixie Chapter
    Hi, can anyone recommend an engine machine shop and/or a transmission shop in the Huntsville AL area? I'm just rebuilding a stock engine. Thanks
  3. Noobie Bronco Tech Questions. Flame free zone!
    So while the trans is getting fixed I'm looking over the wires and I saw this,they have done this before,does any one have a diagram to make sure they have it right, also should I just re do it my self? Thanks
  4. Noobie Bronco Tech Questions. Flame free zone!
    So after a few days of taking everything off im super close to finally taking the trans down. I got a 3 ton jack and a transmission adapter for it. But i cant find any good write ups or videos of how to take the converter bolts out!!! any help would be great!!! Also when trying to take down...
  5. Noobie Bronco Tech Questions. Flame free zone!
    I have a 94 Ford bronco full size has 212k miles I’ve noticed my transmission is shifting hard and now I can not get over 70mph it’ll bog down the rpms will drop and my speed drops like crazy. This began Friday 01/15/21 today 01/18/21 having issues getting past 30 when it does it still shifts...
  6. 1980-'96 Bronco Tech
    So im going to soon see about rebuilding my trans, sending it out to do it but i need to give them the parts to do it. Whats the best kit that doesnt break the bank? cause i could just get the bottom of the barrel one but i want a decent one for the money. Or atleast any brands i should look...
  7. Noobie Bronco Tech Questions. Flame free zone!
    I have a 1990 Bronco Eddie Bauer 5.8w automatic transmission Issue 1: The truck will not start without the use of starter fluid. Ive checked spark and ignition. Everything checks out it just does not start. Issue 2: Once started with starting fluid the engine races to 1100 rpm and slowly creeps...
  8. Noobie Bronco Tech Questions. Flame free zone!
    I just did a test and found something out !!!! I though it was sticking in 2nd, its actually skipping second and going to 3rd gear. Also i was going to check the fluid level on the trans and when i pulled the "fill here plug" it just poured out wilding out this transmission fluid mix that...
  9. Noobie Bronco Tech Questions. Flame free zone!
    So im going to replace my cluster entirely, mostly because transmission is still been wack, and a shop told me it could be that the cluster is to damaged, so im going to see what i can do to have the local computer shop who specialize in clusters to see if they can get the miles transferred or...
  10. Noobie Bronco Tech Questions. Flame free zone!
    Hello every one, so i had my uncle ask a colleague of his that works on old fords and told me to check to make sure the relays on the tranny are fine, problem is, i dont know which one is which? can some one give me a hand and tell me where they are? cause i know where the fuse box is with the...
  11. Ford Bronco Pickup Truck Discussions
    So my uncle talked to a guy who works with transmissions and said to look for a relay that might be causeing the problem of my shifting, problem is he never specified where it is. Can any one give me a hand and tell me where i should look ? thanks
  12. Noobie Bronco Tech Questions. Flame free zone!
    I posted a thread just a bit ago. My tcc solenoid is not working so I guess it’s time for a new solenoid pack. I have a WAY1 eec and am wondering what solenoid to use. This is the one I have. To me it looks like it has the new style plug however has diodes in place. Did someone just change the...
  13. Noobie Bronco Tech Questions. Flame free zone!
    So I bought a 1989 bronco that had a 1995 5.8 maf motor swapped into it. It’s is run by the WAY1 eec. It was not running well so I tested the tps and it was bad. Replaced it and now motor runs great. Went to test drive it and it won’t shift into second in drive. It will manually. I pulled codes...
  14. 1980-'96 Bronco Tech
    so after doing EVERYTHING! to stop sticking into 2nd gear, tps, instrument cluster, fluid change and additive, it still has the same problem. From what my work colleagues say, 2nd-3rd clutch in the transmission might be gone or extremely worn. When changing the fluids it had a very pungent...
  15. 1980-'96 Bronco Tech
    so after doing EVERYTHING! to stop sticking into 2nd gear, tps, instrument cluster, fluid change and additive, it still has the same problem. From what my work colleagues say, 2nd-3rd clutch in the transmission might be gone or extremely worn. When changing the fluids it had a very pungent...
  16. Noobie Bronco Tech Questions. Flame free zone!
    So i been oover a year looking for a bronco and found one and got it!! really nice looking and all, great interior and super clean but ! theres 2 main problems, 1. it has a iratic idle/rough where some times the motor goes up then down then up and then down and then goes stable, i had a problem...
  17. Noobie Bronco Tech Questions. Flame free zone!
    Hi, I've got 1993 5.0 with I believe the e4od auto transmission. 170k miles (no maintenance lights on) About a couple weeks after buying her it started having strong shifts around 2nd and 3rd gear, it felt like it jolted back. Which it had never done before, I had drove it multiple times before...
  18. Noobie Bronco Tech Questions. Flame free zone!
    Had a leaky rear main in my 92. Replaced it and got the tranny back in. How do I got about refilling the tranny with fluid? And do I need to do anything to refill the bell housing with fluid? Thanks.
  19. Noobie Bronco Tech Questions. Flame free zone!
    E4OD or AOD, which is better and why? Ready. Go!
  20. Noobie Bronco Tech Questions. Flame free zone!
    Hey guys, I've searched this forum and found several helpful discussions on this and it's potentially helped my problem. My 94' Bronco stalls out when put into Drive and 2nd gear. 1st, N, and Reverse all work fine. I ran codes and got a 629. Which indicates solenoid did not change state...
Top