Bronco Forum - Full Size Ford Bronco Forum banner
1 - 1 of 1 Posts

· huh
1995 Bronco, Slightly Modified
5,965 Posts
tap it with a hammer.. try to get a screwdriver between the spindle and the caliper bracket. it has to come out evenly so go around. its a real pain in the butt the first time you take it off so make sure to get some Anti-Seize in between the 2 pieces so that next time it will come out easy. There are some pullers you can buy/rent.. But a screwdriver and hammer work well... Good luck.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.