302-351 powersteering bracket

1 - 2 of 2 Posts

TravisITGuy

aka: kemicalburns

Joined Mar 12, 2003

7,802 Posts

Discussion Starter • #1 • Oct 21, 2003

this new 351w i just got didnt come with the powersteering bracket. I pulled the one off of my 302 and it bolts up to the 351 and looks to line up with the pulleys. does anyone know for sure if this works?

Thanks guys

Crazed

F.O.T.Y. 2003

Joined Feb 26, 2003

8,374 Posts

#2 • Oct 21, 2003

Yup, it fits

1 - 2 of 2 Posts

Recommended Reading

2WD Grinding in reverse

1980-'96 Bronco Tech

My 86 full size Bronco is grinding in reverse and park slips. This only occurs in 2wd, 4hi. 4low is fine. I believe that the problem is my t-case. My truck has been sitting for awhile due to the driver side front wheel spacer breaking which cause me to dig the front end in the ground. Impact was...
- 55
- 916
- P
  Putman911 · updated a moment ago
351W Camshaft Selection

1980-'96 Bronco Tech

Still mulling over my camshaft selection and looking for opinions. Safe option is the Edelbrock 2182 and it is designed to work with my Eddy Performer plus intake and e-street heads. Comp Cams is recommending the 35-238-3. What say you? I'm on 35's, stock stall in C6, 3.54's and plan on going...
- 22
- 442
- biggum · updated 19 m ago
Tailgate Window Gets Stuck

1980-'96 Bronco Tech

I did the tailgate rewire by eighty5eddie after I replaced the tailgate and fixed the wiring debacle the PO left. Now the dash switch works and the key switch works. However when it is all the way up I am not able to get it down and have to use a suction cup to get it down until it is more near...
- 22
- 557
- G
  GriffinB · updated 1 h ago
Installed Traxion Tailgate Ladder

1980-'96 Bronco Tech

Don't consider myself old, but I've always found it a royal pain to get in and out of the back of my Bronco..Not sure how high the tailgate is but loading or unloading anything where you have to get in the back is a chore, so I purchased this.. Tailgate ladder It's your typical Chi-com stuff...
- 19
- 233
- jermil01 · updated 2 h ago
Looking for a roof rack that can hold a tent on top.

1980-'96 Bronco Tech

I assume I need a rack that isn’t bolted directly to the fiber glass top for more support. I’ve seen some old ones that seem to rest on top of the truck bed rails sandwiched between the top and bed rails. This seems stronger. Any ideas? Sent from my iPhone using Tapatalk
- 4
- 87
- Caldwell88 · updated 4 h ago

Top

302-351 powersteering bracket

TravisITGuy

aka: kemicalburns

Crazed

F.O.T.Y. 2003

2WD Grinding in reverse

351W Camshaft Selection

Tailgate Window Gets Stuck

Installed Traxion Tailgate Ladder

Looking for a roof rack that can hold a tent on top.