Bronco Forum - Full Size Ford Bronco Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
146 Posts
Discussion Starter #1
Picked up an '85 with the above motor and :banghead cannot find any specific information about this motor and what kind of power it puts out versus a standard 351. Hope someone can point me in the right direction. I'm thinking of spending some cash on it and would like to know more about what Ford actually has already done to it versus a standard 351. Appreciate the help guys.:beer
 

·
Rest in Peace Friend...
Joined
·
3,220 Posts
The H.O. (High Output) option included a 4 bbl carb and intake. The carb is a Holley 4180 built for MotorCraft, which is Ford's part division. There is a spaghetti mess of vacuum lines on top of the intake, and it has an 18" air cleaner which can rub on the front plastic ported vacuum switch causing you problems. I swapped to an Edelbrock 4 bbl intake and cleaned up about half of those vacuum lines, and installed the Shaker assembly. It's still a 351W, and will become another boat anchor when you bend a rod or two. JSM84
 
1 - 3 of 3 Posts
Top