Bronco Forum - Full Size Ford Bronco Forum banner

1 - 1 of 1 Posts

60 Posts
Discussion Starter #1
I need the engine side bracket for the Bell Crank on the Manual Clutch setup on a 82 Bronco. This piece I believe bolts to the Engine to Bellhousing bolts and has a ball on it to accept the Bell Crank for the Clutch engage/dis-engage. I am working on a the 351w will work and I have heard the 300 will work but I am not 100% sure. The 351m I am positive will not work.

Also need throwout fork for same thing...:beer

I am converting from a C-6 Auto to a T-18 Manual.

1 - 1 of 1 Posts