Bronco Forum - Full Size Ford Bronco Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter #1
Hello all, glad i found this forum. Here's the quick of it, I have a dead 87 full size with a 302 and AOD, engine, trans, t-case dead ( long story ), I found an 89 with 351w on CL for cheap that has been in an accident and the drive train is all still in great condition, I have not done a full drive line switch and i need a bit of assistance.

Haven't found exactly what i was looking for so i figured i would throw it out here. I plan on switching everything i can from the 89 into the 87. Engine, trans and t-case. Would this be as simple as just putting it in and hooking it up? or are there other things i need to be aware of.

A super quick step by step would be perfect.

Thanks a lot
 

·
Registered
Joined
·
194 Posts
Unplug everything, unbolt, swap, rebolt and replug, and be sure to put the 351 computer into the truck too. The only thing to look for is to make sure its not an electronic over drive transmission.
 
1 - 3 of 3 Posts
Top