Bronco Forum - Full Size Ford Bronco Forum banner
1 - 2 of 2 Posts

· Premium Member
1991 Ford Bronco XL
Joined
·
93 Posts
Discussion Starter · #1 ·
Have a couple questions (well actually hundreds but lets pace myself) 1st is my overdrive switch on dash is missing will a regular lighted toggle work in place of it? Finally found a set of buckets w/console and back seat all matching I am missing the two floor mount brackets that let rear seat fold forward can you order them? just fabricate? Got the critter all fixed as far as A/C replaced everything dryer, condenser, compressor, orifice tube, and inside box got started on it and orifice tube was full of metal so just bit the bullet and did it all need it here in Alabama working great we got a dah readout of 68 degrees I'm happy. Still trying to figure OBD power point no voltage checked fuses as someone recommended all were good but radio have to put one in anyway, but still have engine lite on. Well check on answers to these two and add more later . Thanks for all the help
 

· Premium Member
1991 Ford Bronco XL
Joined
·
93 Posts
Discussion Starter · #3 ·
Hey there...lmc truck or Jeff's bronco graveyard sold be able to help with the od switch and the seat tracks.

Any chance the check engine light could be oxygen sensors? Had that happen with my 90 bko and 99 expedition.
I have found that I'll need to check just power washed under mud every where and red clay at that the kid that owned it put shortie headers and had an exhost built it's quite a Frankenstein under used a cross over pipe cut it in half to get it to fit then stacked sone pipes to blend the headers and oxygen sensor is in another pipe between the two but there is an oxygen sensor. Now I need to clean driveway my wife is mad she got some mud on her new SUV but I'll check had to come in another gully washer hit here, maybe it will clean the drive
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top