Bronco Forum - Full Size Ford Bronco Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,716 Posts
The FPM is unlikely to sit deep enough in the tank to reach the bottom. I have a FPM from a 94 F-150 and it is several inches shorter than the 33 gallon Bronco version. I would have had to put the pump on some extension to make it work. Also the angle of the sender was such that my extension would have had to have a bend in it to locate the pump in the tank well. The stock FPM is already a snug fit in the 3 5/8" hole so I was doubtful an extension was going to make fitment any easier. The fuel level sender had the same challenges too.
 
1 - 1 of 1 Posts
Top