[UncleSpam81st]

Bronco has 4" lift and 33" tires with 3" exhaust. Everything else is stock. Wanna do complete upper overhaul of motor but seem to lack good places for parts due to everyone lists up to 95. For some reason I have worst truck listings in almost every part store. Would like to redo complete exhaust from headers back including upper half of motor? Any good suggestions and help please? First post so be gentle!!

 

[bergs]

i think the 96 is the same as a 95. The only difference is the obdII set up has more sensors and a different computer. but the basic hardware like gaskets and stuff should be the same.

 

[UncleSpam81st]

So whats the best intake, headers, manifold, valve covers and heads so I can get more from the stock motor? Currently overseas so geting to read replies takes on average a couple of daysso bare with me here. Thanks for al the help!!

 

[bergs]

So whats the best intake, headers, manifold, valve covers and heads so I can get more from the stock motor? Currently overseas so geting to read replies takes on average a couple of daysso bare with me here. Thanks for al the help!!

i's suggest the gt-40 stuff, intake and heads. see if you can find used lightning parts, thats probably the cheapest bang for the buck.

 

[XDAILY]

http://store.summitracing.com/egnsearch.asp?N=700+4294924746+4294908331+115+4294908330&SearchType=Make

Order away :beer

 

[seawalkersee]

My GT40 heads are for sale. Less than 10 on the valve job and about 20 hours of exhaust porting on them. $200 +shipping.

Chris

 

[mud_slinger18]

Bronco has 4" lift and 33" tires with 3" exhaust. Everything else is stock. Wanna do complete upper overhaul of motor but seem to lack good places for parts due to everyone lists up to 95. For some reason I have worst truck listings in almost every part store. Would like to redo complete exhaust from headers back including upper half of motor? Any good suggestions and help please? First post so be gentle!!

say u need 96 f150 parts they r both the same vehicle pretty much just different bodies same frame motor suspension