Bronco Forum - Full Size Ford Bronco Forum banner
1 - 1 of 1 Posts

·
FSB's Resident A$$HOLE
Joined
·
2,644 Posts
you have to have anywhere from 6 to 8 inches, in order to clear the engine crossmember. you may be able to fab up some kind of new crossmember, but that would be a lot of extra work just to keep it to 2 inches less. if you engineer everything right i think it could be more stable than your stocker with 6 inches. look at all the other guys superfords that have the SAS and see what they have done, especially chris85xlt

wes
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top