Bronco Forum - Full Size Ford Bronco Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
76 Posts
Discussion Starter #1
I'm putting a 435 in my 1978 bronco. tring to do it right the first time. I have a coulple of transmision and transfer case put have taken apart form different trucks. I need to know how long the adapter is and the part number on it. some are alittle over 8in and the others is 8 1/2 in. if someone could get my the number that would be get.
thanks doug.
also if someone has them apart how long is the shaft coming out of the trans.
 

·
Registered
Joined
·
528 Posts
It's 8 3/4" long. I can get the number off one later. One I have is out at the farm in the barn. Cast iron, weighs about 27lbs.
 

·
Registered
Joined
·
533 Posts
I'm putting a 435 in my 1978 bronco. tring to do it right the first time. I have a coulple of transmision and transfer case put have taken apart form different trucks. I need to know how long the adapter is and the part number on it. some are alittle over 8in and the others is 8 1/2 in. if someone could get my the number that would be get.
thanks doug.
also if someone has them apart how long is the shaft coming out of the trans.
no clue what you are talking about. you want a manual? should of could of bought one. my vote is keep bumping yourself to the top. :thumbup good luck
 
1 - 7 of 7 Posts
Top