Bronco Forum - Full Size Ford Bronco Forum banner

Aftermarket steering wheel

781 Views 2 Replies 2 Participants Last post by  LMV1994
Hello everyone, I was wondering if anyone has swapped out the steering wheel for an aftermarket one like grant, or a quick disconnect one, I have a 95 bronco and my steering wheel has seen better days. I'd rather go for a aftermarket quick disconnect one rather than a OEM style one. Does it involve a lot of work or is this not possible? TIA
1 - 3 of 3 Posts
Yo LMV,
Since Supermotors is DEAD slow again, I can't recall is this swap included a quick disconnect feature.
Installation, Grant in a 93; miesk5 Note, to pull the steering wheel in the late models, a 2-jaw puller is needed. There are no holes to thread in the usual bolts for a steering wheel puller, thnx to Dustball!
Source: by spivster (Joe S)

See steering Wheel Removal Video in a 94; MIESK5 Note, check AIR BAG DISABLE PROCEDURE AND TIME (Always Check the Service Manual) Disconnect and isolate battery ground cable. Wait at least 1 minute. ENSURE that av previous owner or shop didn't add another battery to circuit for options, etc.

  • Like
Reactions: 1
Yo LMV,
Since Supermotors is DEAD slow again, I can't recall is this swap included a quick disconnect feature.
Installation, Grant in a 93; miesk5 Note, to pull the steering wheel in the late models, a 2-jaw puller is needed. There are no holes to thread in the usual bolts for a steering wheel puller, thnx to Dustball!
Source: by spivster (Joe S)

See steering Wheel Removal Video in a 94; MIESK5 Note, check AIR BAG DISABLE PROCEDURE AND TIME (Always Check the Service Manual) Disconnect and isolate battery ground cable. Wait at least 1 minute. ENSURE that av previous owner or shop didn't add another battery to circuit for options, etc.

Thanks for the info 🤙
  • Like
Reactions: 1
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top