Joined
·
24 Posts
where is it on a 90' 302??
air charge temp. sensor location??
1 - 4 of 4 Posts
Joined
·
10,875 Posts
should be here:
http://fordfuelinjection.com/broncodriver/Intake_WO_ACT.jpg
warning it's a LARGE picture
http://fordfuelinjection.com/broncodriver/Intake_WO_ACT.jpg
warning it's a LARGE picture
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
Catalytic noise
1980-'96 Bronco TechSo my catalytic is obviously broken inside, it makes an awful rattling noise when idling, upon inspection i have 2 converters and the line coming from the EGR is also broken and not attached to the cats. My FSB is is an 89 and i have vintage registration not requiring emissions anymore, so what...- 3
- 149
-
desertdog · updated
-
throttle cable has to much slack
1980-'96 Bronco TechI have a 1990 bronco 5.0, a few years ago I had my throttle cable replaced while replacing the heads, I didn't drive it much since then and now that I'm getting it river ready I noticed my pedal has 3/4" to 1" of play, I'm wondering if anyone knows how to take the slack out of it.?- 5
- 111
-
Jaydanf777 · updated
-
Rally/Wink/5 Panel Rear View Mirrors
1980-'96 Bronco TechDoes anyone have one of these in their ride? Do you like it? Did you ditch the factory mirror? https://www.jegs.com/i/JEGS/555/90316/10002/-1 Just curious. Paul- 14
- 359
-
marshallnoise · updated
-
-
Handling problems 5.5" lift
1980-'96 Bronco TechI wanted to pick up some cut and turn beams for my bronco because right now I have drop brackets and I'm running 5.5" deaver coils up front with a 4" drop pitman (JBG 5.5" lift). I'm able to get the alignment within spec but it still handles like crap in turns. My tires squeal (sounds like...- 7
- 144
-
Rextec · updated
Join now to ask and comment!