Bronco Forum - Full Size Ford Bronco Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
found this site thru pirate4x4.com. came here to do some research on getting rid if the twin beam front axle and some ideas on a straight axle swap, t-case doubler and any other gremlins that might come up on the possible future build.

i know that this is a bronco site, but my possible project truck will be an early 80's F150 shortbed. it has a tired 351M v8, standard trans, stock front and a ford 9 w/ ls. height is stock.

project goals is to get the free truck on 38's, straight axle conversion, hydro assist steering, lockers front and back, a doubler t-case, full cage, and a custom bed that holds 2 spares and all the necessary tools, recovery gear.
 

·
Driving Stuff Henry Built
-90 xlt, 351w, e4od, man 1356, 3.55, sag, warn hubs, 35s. -73, 400, np435, d20j twin, 35s
Joined
·
8,067 Posts
Hey, welcome to the site! It sounds like a good project. :thumbup Make sure that you see the Solid Axle Swaps forum.

I've seen a few other guys from Hawaii around here. One of you ought to start a "Hawaii Check In" type thread.
 
1 - 4 of 4 Posts
Top