Bronco Forum - Full Size Ford Bronco Forum banner
1 - 9 of 9 Posts

·
tired of your sh!t
Joined
·
2,880 Posts
Discussion Starter · #1 ·
what should the bracing be...flat plate with some speed holes, like some radius arms, 1X2 ,or tube? Evilbronc? peanut gallery?








 

·
tired of your sh!t
Joined
·
2,880 Posts
Discussion Starter · #3 ·
never thought of that you :rockon

can you put evilbronc in there instead,for the pic?
 

·
tired of your sh!t
Joined
·
2,880 Posts
Discussion Starter · #10 ·
welndmn said:
I don't thing you need anything in there, But are you going to have a shackle frame mount? or does that tube telescope?
If it telescopes then i would plate it with some 1/4 and speed hole it
it telescopes with 1 1/4" solid round. should I set screw in one side so it's replaceable or just plug weld?
and thanks.
 

·
tired of your sh!t
Joined
·
2,880 Posts
Discussion Starter · #12 ·
the plugs would suck to drill out if the round stock wears out.It'll last along time with a zerk for grease,but eventually it will have to be replaced. locking collar ideas?
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top