Bronco Forum - Full Size Ford Bronco Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
196 Posts
They do have a low pressure switch mounted on the reciever dryer.If you want to test the switch,unplug it and turn on the a/c.Put a jumper between the 2 terminals on the plug.If the compressor fires up then the electrical to the switch and to the compressor are good.If it doesn't fire up check one terminal for power.The other should be ground.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top