Bronco Forum - Full Size Ford Bronco Forum banner
1 - 4 of 4 Posts

·
Registered
1996 Ford Bronco XL
Joined
·
1,400 Posts
Mine didn’t fit quite right. Can’t get my truck into alignment on the passenger side. The camber or caster is off. Don’t remember which
 

·
Moderator
85 Bronco, 309ci I6 w/4bbl, np435, 4" lift, 37" Irok NDs, 4.56 w/ Detroit Locker and tru trac
Joined
·
18,059 Posts
Mine didn’t fit quite right. Can’t get my truck into alignment on the passenger side. The camber or caster is off. Don’t remember which
Because their instructions are TERRIBLE! As yours was installed, exactly following the miniscule instructions, the both radius arm mounts are too far forward. If i had a bit more time (and energy lol) i would have moved them 2" farther back. As i remember it sitting, there was no adjustment room left to bring the axle a bit rearwards.

As far as the parts themselves, they seem very well built. Definitely impressed. But for the money they cost, they should be.
 
1 - 4 of 4 Posts
Top