Anyone know off the top of their head...
1 - 4 of 4 Posts
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
Handling problems 5.5" lift
1980-'96 Bronco TechI wanted to pick up some cut and turn beams for my bronco because right now I have drop brackets and I'm running 5.5" deaver coils up front with a 4" drop pitman (JBG 5.5" lift). I'm able to get the alignment within spec but it still handles like crap in turns. My tires squeal (sounds like...- 6
- 110
-
Rextec · updated
-
Issues with installing sway bar on Ford 9" housing
1980-'96 Bronco TechHi all, I currently removed my 8.8" and am installing a Ford 9" into my '85 Bronco. However, I noticed right away that there are alignment tabs on the 8.8" housing for the sway bar brackets that are not present on the 9" housing. With as much highway driving as I do, I'd really like to...- 1
- 31
-
AbandonedBronco · updated
-
What are the recommended stock leaf spring replacements?
1980-'96 Bronco TechHi all, I'm in the process of swapping out the 8.8" axle for a Ford 9" axle. At this point, both of the leaf springs are only held on by the end bolts so I'm contemplating replacing them. There's no better time! However, finding STOCK replacement leaf springs is not as easy as it sounds...- 3
- 62
-
AbandonedBronco · updated
-
throttle cable has to much slack
1980-'96 Bronco TechI have a 1990 bronco 5.0, a few years ago I had my throttle cable replaced while replacing the heads, I didn't drive it much since then and now that I'm getting it river ready I noticed my pedal has 3/4" to 1" of play, I'm wondering if anyone knows how to take the slack out of it.?- 2
- 57
-
Jaydanf777 · updated
Join now to ask and comment!