Bronco Forum - Full Size Ford Bronco Forum banner
1 - 3 of 3 Posts

· Registered
1996 Eddie Bauer 5.8L,Trailer Tow Package, Tilt Steering Wheel, Rear Torsion Bar
Joined
·
118 Posts
Discussion Starter · #1 ·
I have a 1996 Eddie Bauer with the 5.8L engine. I would like to replace all of the vacuum lines on the engine since I've recently turned over 350,000 miles. I hate to start a project like this with having a reputable source of supply.

Thanks in advance for a information.
 

· Super Moderator
Joined
·
33,876 Posts

· Moderator and Scrounger Extraordinaire
85 Bronco, 309ci I6 w/4bbl, np435, 4" lift, 37" Irok NDs, 4.56 w/ Detroit Locker and tru trac
Joined
·
20,126 Posts
Do NOT get cheap silicone hose... It cant withstand even a few inches of vacuum. Also, replace the hard plastic tubes with hose.

I just generally go to the auto parts store for my vacuum hoses.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top