Bronco Forum - Full Size Ford Bronco Forum banner
1 - 1 of 1 Posts

· Moderator and Scrounger Extraordinaire
85 Bronco, 309ci I6 w/4bbl, np435, 4" lift, 37" Irok NDs, 4.56 w/ Detroit Locker and tru trac
19,755 Posts
87+ 8.8 axles had the VSS provision in the rear axle. Thats what you need. You'll be looking for a certain code in the axle slot on the door jamb sticker. 15, H5, or H52 will all designate 4.10 gears. H5 is rear limited slip. H52 is both limited slip. On an F250 for the front diff, as noted above, the code will be 35, for an open diff one ton axle.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.