Bronco Forum - Full Size Ford Bronco Forum banner
1 - 2 of 2 Posts

· Former owner of Shadofax
Joined
·
17,475 Posts
thanks the guy is going to messure and call me later. I am keeping my fingers crossed. and hoping it works
Don't bother.

not wide enough
is it leaf sprung?
think bolt pattern for wheels is different.
can't remember but it could be passenger diff as well.

there are still plenty of 76-79 Ford fullsize D44's out there.
 

· Former owner of Shadofax
Joined
·
17,475 Posts
Yeah but I can't find a 76-79 ford d44 for $25 that is complete. also it is a drivers side diff. and it is 51" from kuckle on house to knuckle on housing. And besides I am eight lugging it anyway.
Not sure what that measurement means "knuckle on housing"? an '80 waggy has to be about 4" or so short length wise.

Is it high pinion?

Complete D44's stock you should able to find pretty easily for about $200. Heck you don't need complete if you are 8 lugging it. All you really need is a D44 housing.

Edit: that's actually what I bought, a '78 housing, and then all the 8 lug outer stuff for a chevy setup. And of course the end plan was to run alloy shafts and joints anyway, which are a stock item for all the dealers as far as ford and chevy inners/outers go.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top