Bronco Forum - Full Size Ford Bronco Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
374 Posts
Discussion Starter · #1 ·
I've been calling fourwheelparts, deetz and posting on ford-trucks and I've gotten different reccomendations. I've been told 3.75-4.25 to prevent rubbing at full turn and 4.25-4.75 to keep the leverage on the wheel bearings reasonable. What do you guys think is best for a 6" lifted 92 with superrunner radius arms that will have 35-37x12.50 tires?

I'm thinking about 4.25 and I can always use a 1/2" spacer if the rubbing is too much.
 

·
Registered
Joined
·
374 Posts
Discussion Starter · #4 ·
Update; these wheels (17x9 w/ 4" B.S.) with 315/70r17 (~35x12.50) Kumho's allow full turning radius w/o rub on a 4" lifted 1990 Bronco w/ stock radius arms and steering (update: almost no rub on extended radius arms)

 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top