Basic question about carriers and spider gears
1 - 4 of 4 Posts
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
Converter Stall for RV Cam
Noobie Bronco Tech Questions. Flame free zone!Hi everyone, I have a 93 Bronco 302 E4OD with a RV cam and hot ignition in it. I am rebuilding the transmission, and I am lost as to what stall converter to order. I know that RV cams are “low torque” cams, but the PO put the cam in so I don’t have the specs. Being that it is a low torque cam...- 4
- 67
-
Hardtop Quick Disconect
Noobie Bronco Tech Questions. Flame free zone!Anyone used jeep hood latches to make the hardtop a quick disconnect? If not can it be do e and be functional? What are some other options of making the top a quick disconnect?- 15
- 301
-
Spence_A_R · updated
-
Lower Intake Manifold
Noobie Bronco Tech Questions. Flame free zone!Last week while working on my Bronco I found a crack on the lower intake manifold. I was wondering if i need the exact match or if I am able to use a different one? I have a 94 XLT with a 351W.- 14
- 179
-
Asking for help with no start.
Noobie Bronco Tech Questions. Flame free zone!I just recently got another 1990 bronco with a 351, and it started when i bought it then drove it 30 miles, parked it overnight and then tried to start it, it cranks revs up and them back down then continues to crank. It has a new distributor, plugs, wires, ignition switch, coil, fuel pump and...- 8
- 88
-
We are learning
Noobie Bronco Tech Questions. Flame free zone!As many of you already know my Son and I are new Bronco owners. We are excited to learn and do as much as we can ourselves with our new Bronco. I wanted to take it to a mechanic that is good family friend of ours to have it initially looked over. Our newly acquired Bronco had been parked in a...- 21
- 871
-
JoelS · updated
Join now to ask and comment!