Bronco Forum - Full Size Ford Bronco Forum banner
1 - 2 of 2 Posts

· is hazardous to others
Joined
·
1,670 Posts
We used a Fel Pro vally pan and rtv on both sides. Also used rtv on the front and back rubber gaskets.
I would hate to be the next person to take that intake off. RTV should have only been used on the front and back of the intake.. you put RTV on the rubber gaskets too??? should not do that.. use one or the other not both.. but for the oil usage.. look into the PCV valve. i have seen them suck alot of oil.
 

· is hazardous to others
Joined
·
1,670 Posts
on diff covers i use only RTV without a gasket.. only place i use RTV on a motor with a gasket is the waterpump (only because it leaked with gaskets alone) than i use it on the front and back of the intake, other than that i just use the gaskets..
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top