Bronco Forum - Full Size Ford Bronco Forum banner
1 - 4 of 4 Posts

·
FSB warrior
Joined
·
6,113 Posts
no circle drawing capabilitys but behind your carb, behind the EGR crap there is a vacumm tree. It goes to one of those 9 fittings.
 

·
FSB warrior
Joined
·
6,113 Posts
your lookin at the right tree... it says manifold, thats a manifold vacumm source, the only one for excessorys like that. I dont think you did anything wrong. What is it that the can didnt do??
 

·
FSB warrior
Joined
·
6,113 Posts
I think I know the problem!

how long is the hose??? is it long enough to go to the drivers side, on the tranny.... if so thats def the problem!! Your vacumm modulator thing on your tranny is not plugged in. Get down under the truck and see if you can see a vacumm hose plugged in there, then go up towards the engine and trace....


Good luck!
 

·
FSB warrior
Joined
·
6,113 Posts
was excited, thanks for stealing my thunder..... hope you find the problem
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top