Brake rotors
1 - 4 of 4 Posts
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
Pinion Angle
Noobie Bronco Tech Questions. Flame free zone!Needing some help on what pinion angle shims I need. The driveshaft is at 18 degrees and the yoke is at 9 degrees.- 10
- 346
-
Bayou1972 · updated
-
Converter Stall for RV Cam
Noobie Bronco Tech Questions. Flame free zone!Hi everyone, I have a 93 Bronco 302 E4OD with a RV cam and hot ignition in it. I am rebuilding the transmission, and I am lost as to what stall converter to order. I know that RV cams are “low torque” cams, but the PO put the cam in so I don’t have the specs. Being that it is a low torque cam...- 7
- 149
-
Pinch weld rust
Noobie Bronco Tech Questions. Flame free zone!So I thought replacing the door weatherstrip rubber would be an easy quick project. Found out the bottom pinch weld has two sections about 2 inches in length rusted off. Part of me wants to put the rubber seal over it and forget I saw it. I don’t weld so is there another option or do I bite...- 2
- 50
-
Troy Lauchman · updated
-
Who Is/Was Fireguy??
Noobie Bronco Tech Questions. Flame free zone!I've seen his name mentioned in several posts and that he's no longer around. Who is/was he ? Did he retire? Pass? Change hobbies?- 10
- 279
-
Desert Bronco · updated
Join now to ask and comment!