[GunDude]

I am piecing together a 6" lift and was wondering how long the front bump stops need to be, do I really even need them!

If I actually need to extend the bump stops, as determined by replies here. I was thinking of cutting a piece of 4" wide steel tubing about 2" long and mount a bump stop on one end and the other to the frame or wherever it attaches.

I will not be doing any hard core off road yet, still a DD, and will be keeping the front sway bar for now.

 

[Redwagon]

the pro comp kit I originally installed had a piece of 2x2 square tube that was used as a bump stop extension.

 

[Redwagon]

you can see it in this pic...bolted to the frame and the bump stop bolted to it...