Bronco Forum - Full Size Ford Bronco Forum banner
1 - 3 of 3 Posts

· OUT OF BUSINESS / M.I.A.
Joined
·
9,690 Posts
You got those codes wrong. Here is the corect meanings:
31 - EVP circuit below minimum voltage
45 - Thermactor secondary air is misdirected
84 - EGR vacuum solenoid circuit falt

Fix the EGR valve sensor (#31)
#45 & 84 don't affect anyhting with the enigne running. You can check the wiring to the EGR vacuum solenoid or replace it if you want. #45 could be a vacuum line in the worng place.
 

· OUT OF BUSINESS / M.I.A.
Joined
·
9,690 Posts
southerntrax said:
oh ok thanks, i got the codes off of that ford fuel injection.com site. maybe there wrong or i looked at it wrong.
:twak that's my site, I wrote it :twak you worte:
84 - EGR vacuum solenoid circuit falt
45 - hego lean at wot
31 - PFE or EVP circuit below min volt
my site says:
31 - EVP circuit below minimum voltage
45 - Thermactor secondary air is misdirected
84 - EGR vacuum solenoid circuit failure

Not sure where you got those codes, but they aren't even writen the same

southerntrax said:
alright i think i got this but, the egr valve sensor for code 31 where is that?
thanks
egr valve sensor is the EVP in this pic:
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top