Bronco Forum - Full Size Ford Bronco Forum banner

1 - 12 of 12 Posts

·
Registered
Joined
·
51 Posts
Discussion Starter #1
It's for sale. Make me an offer. Located in New Haven, CT 06512

Doors work but have rust on the bottom. Other than that it works.

Specs:
Coil sprung Dana 60 open 4.56
14 Bolt welded 4.56, disc conversion
High Angle Driveline shafts front and rear - Driveline e-brake that I never hooked up
Healthy 460,6" K&N with Xtreme top, Edelbrock 750, L&L fenderwell headers, Flowmasters, Jacobs ignition, Edelbrock intake, Edelbrock waterpump,Edelbrock Fuel pump, Dual Optimas, All Aeroquip braided stainless lines with AN fittings
42" Swampers on 15" Rockcrawlers
Kinda beat up Bushwacker Cut-Outs
Herculined interior
Borgeson steering shaft
PSC hydro assist steering
Rockproof steering linkage and trac bar
Hurst line lock
B&M tranny -so I'm told -it's the heavy duty C6 with the fins, B&M Truck Megashifter, B&M converter
Autometer guages replaced factory dash
35 gallon poly tank and Por15'd skidplate
Factory transfercase skidplate
air horns
4 Daylighters on light bar
Soft top that was from another year but still works.
Grant Steering wheel with aluminum "Ford" horn button
relay headlight mod.
Jacobs ignition/wires


Needs TLC
 

·
Registered
Joined
·
1,133 Posts
Post up some pics and please come up with a price.
-Casey
 

·
Registered
Joined
·
51 Posts
Discussion Starter #7
I "may not post attachments". If you want pics -I'll e-mail them to you.
Looking for $4500 but I'm flexable
 

·
Registered
Joined
·
469 Posts
Deadman514 said:
I "may not post attachments". If you want pics -I'll e-mail them to you.
Looking for $4500 but I'm flexable
Guys, if you look at the work done to this rig and the time effort and cash it would take to do it yourself, the price he is looking for is a STEAL! Its already priced too low, so get this rig before he comes to his senses! :toothless

Seriously, I wish I could buy it myself, but I am in Tennessee and saving for the down payment on a house (and a place to work on my rig that doesnt involve rolling around in gravel and dirt). :doh0715:

Bump!!!
 

·
Registered
Joined
·
369 Posts
Wow, TeamBigUgly, haven't heard that in a while. Good luck selling it, I'd grab it if I had the $$. Glenn or Jamon do any of the work on it?
 

·
Registered
Joined
·
51 Posts
Discussion Starter #11
AcePaul said:
Wow, TeamBigUgly, haven't heard that in a while. Good luck selling it, I'd grab it if I had the $$. Glenn or Jamon do any of the work on it?
Jamon welded on the hydro assist brackets the first time around (when it had a 44 front).

Still selling...$4k?
 
1 - 12 of 12 Posts
Top