Bronco Forum - Full Size Ford Bronco Forum banner

Extended radius arm question

1059 Views 5 Replies 6 Participants Last post by  Trckmagik
I just got home w/ a slightly used Superlift 6" w/ the extended radius arms. I don't have any paper work w/ it, and I'm not sure how far back to move the radius are brackets. So how far back? Thanks
1 - 1 of 6 Posts
measure the new and the old this will tell you. i got a set of skyjacker extended arms and they were 15" longer. i took a 1/4"X 1" flat stock and drilled 2 holes 15" on center and installed a bolt in both ens and clamped the stock mount to the frame and used the "Jig" to get the right distance to the new mount. from lining up the front jig bolt in an old mount hole. worked fine for 2 different installs now....mike
See less See more
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.