Bronco Forum - Full Size Ford Bronco Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
562 Posts
Discussion Starter · #1 ·
Feeler: 78/79 Kingpin D60 - 4.10 gears SOLD

Looks like I'm running out of time and ambition to get my SAS done before the winter and I'm considering selling my D60.

Has been totally disassembled except for the carrier and has been wire brushed. The gears are in very nice shape and look like they were recently replaced.

Comes with a brand new thick stamped steel OEM Dana cover and all new bolts. Also comes with another set of hubs and rotors from a D50 that look like they can be cut are re-used.

The King Pins have already been broken loose and it is nearly ready for paint and re-assembly. Tie rods were shot and I'm not sure if I saved them or not.

Looking to get $750 and I will help with shipping if need be by strapping it to a pallet and taking it to DHL.

If no interest here, it'll be going on ebay.



 

·
Registered
Joined
·
562 Posts
Discussion Starter · #4 ·
I could but I'd rather just put everything in a box and strap it to the pallet.

You are going to want to replace the bearings and seals anyway.
 
1 - 5 of 5 Posts
Top